Section 1 - 9600 Compressor Description; General; Compressor Configurations; System Documentation - HELIX 9600 Installation, Operation And Maintenance Instructions

Section 1 - 9600 Compressor Description

General

Compressor Configurations

System Documentation

CTI-CRYOGENICS Helium Refrigeration System

©2007 Helix Technology Corporation
This manual provides the information required to install, operate, and
maintain the CTI-CRYOGENICS 9600 Compressor.
NOTE: All personnel with installation, operation, and maintenance
responsibilities should become familiar with the contents of both the 9600
Compressor Installation, Operation, Maintenance, and appropriate
cryopump manuals to ensure safe, high quality, and reliable system
performance.
Refer to "Appendix A - Customer Support Information"
local Customer Support Center for information on connecting 9600
Compressors to a manifold with other CTI-CRYOGENICS
compressors.
The 9600 Compressor supports either On-Board or Cryo-Torr Cryopumps.
For multiple cryopump installations, an On-Board Splitter Box or Cryo-
Torr Interface can be used for cold head power distribution that reduces
total cable requirements as shown in
The manuals for a system cover two basic components: the cryopump and
the Compressor. A manual is shipped with each system component to
provide information for installation and operation of that component. A
loose-leaf binder with index tab separators is also provided so you can
compile a complete set of tabulated manuals.
The operation of CTI-CRYOGENICS' cryopumps is based upon a closed
loop helium expansion cycle. The system is made up of two major
Part Number 8040437, Revision 104, 06/12/2007, ECO Number 18068
CAUTION
Figure 1-5 and
to contact the
Figure 1-6.
1-1