Compressor Inspection; Compressor; Helium "Off" Condition Pressure Verification; Shipping Carton Contents - HELIX 9600 Installation, Operation And Maintenance Instructions

Compressor Inspection

Compressor Inspection

Compressor

Helium "OFF" Condition Pressure Verification

Shipping Carton Contents

2-2 Part Number 8040437, Revision 104, 06/12/2007, ECO Number 18068
6. Carefully roll the Compressor down the ramp and onto the floor.
Inspect the Compressor for visible signs of damage as indicated in the
following paragraphs.
Inspect the exterior of the Compressor for visible signs of damage,
evidence of an oil leak, and check the Helium Pressure Gauge for proper
helium pressure. Report any damage to the shipping company at once.
Refer to "Section 4 - Operation"
Condition) helium charge pressure of the 9600 Compressor.
The shipping carton should contain the following items:
• Compressor
• Two barbed fittings for flexible water lines
• Installation, Operation, and Maintenance manual
• Compressor remote start connector and strain relief
for more information on the ("OFF"
©2007 Helix Technology Corporation