Reconnect A Recently Monitored Patient - Welch Allyn Propaq CS User Manual

Reconnect a Recently Monitored Patient

1. Turn on power to the Wireless Propaq CS and confirm that the monitor
displays the powerup screen.
2. The Wireless Propaq CS will then present a series of menus and
messages requesting you to provide information about the connection
and patient. The actual screens presented depend on how long the
patient has been disconnected.
Provide the information as requested. This may include:
• Select an Acuity unit.
• Select a patient from the patient list.
• Select a patient room from the room list.
If you do not select the patient name or room while connecting the patient,
you will need to do that later at the Acuity Central Station. See the Acuity
System Reference Guide or Acuity Directions For Use for more information.
16 Welch Allyn