Brother BAS-326G Service Manual page 25

2. FUNCTION SETTINGS
PROGRAM No. display
Check code Name
[ 8] [ UP]
[ 9] [ dn]
[ 10] [voL]
[ 11] [PnL]
[ 12] [FtA]
[ 13] [CL1]
[ 14] [CL2]
[ 15] [Stt]
[ 16] [EMC]
[ 17] [HEd]
[ 18] [EXE]
[ 19] [CAH]
[ 20] [rEL]
[ 21] [in1]
[ 22] [in2]
[ 23] [in3]
[ 24] [in4]
[ 25] [in5]
[ 26] [rot]
[ 27] [Fib]
*1 Not used for the BAS-311G and BAS-326G.
18
Menu display
Input status
Needle up signal
[ on] / [ oFF]
Turn the pulley by hand.
Needle drop signal
[ on] / [ oFF]
Turn the pulley by hand.
Power supply voltage
0] − [ 300]
[
Displayed as %
Operation panel input check
[*] / [ oFF] While a key is being pressed, the name of the key will be
displayed.
*ON display
[rESt] RESET key
[tESt] TEST key
[tHrE] THREAD/CLAMP key
[ tEn] TENSION/WIND key
[SELE] SELECT key
[UP-M] key
[dn-M] key
[ F1] Function key F1
[ F2] Function key F2
[ F3] Function key F3
[ F4] Function key F4
[ CF] R/W key
Foot switch analog value (Single pedal specifications)
0] − [ 255]
[
Depress the foot switch.
Work clamp 1st step (2 pedal specifications)
[ on] / [ oFF]
Depress the foot switch to the 1st step.
Work clamp 2nd step (2 pedal specifications)
[ on] / [ oFF]
Depress the foot switch to the 2nd step.
Start switch (2 pedal specifications)
[ on] / [ oFF]
Depress the foot switch to the 2nd step.
[− − on]
STOP switch
[on − −] Press the STOP switch.
[− − − −]
Machine head switch
[ on] / [ oFF]
Tilt back the machine head.
[ on] / [ oFF] External input error detection (IN13)
Thread nipper hope position sensor (IN14) (*1)
Press the
[ on] / [ oFF] direction.
Press the
direction.
Thread nipper retract sensor (IN15) (*1)
Press the
[ on] / [ oFF] direction.
Press the
direction.
[ on] / [ oFF] Option input (IN1)
[ on] / [ oFF] Option input (IN2)
[ on] / [ oFF] Option input (IN3)
[ on] / [ oFF] Option input (IN4)
[ on] / [ oFF] Option input (IN5)
[ on] / [ oFF] Option input (IN11)
[ on] / [ oFF] Fiber-type thread breakage detection [Option compatibility]
BAS-311G, BAS-326G
Check item and checking method
Key name
key to move the thread nipper in the home position
key to move the thread nipper in the retract
key to move the thread nipper in the home position
key to move the thread nipper in the retract