Brother BAS-326G Service Manual page 16

Feed settings
Setting
No.
range
Mechanism home position return when sewing is finished
OFF
250
ON
Feed speed
1
2
251
3
4
5
High-speed test feeding
OFF
252
ON
Home position detection method
OFF
253
ON
Movement path from mechanism home position to start position
0
1
254
2
3
Changes the overall feed timing
260
-10 − 10
Changes the feed timing for the 1st stitch at the sewing start
261
-10 − 10
Changes the feed timing for the 2nd stitch at the sewing start
262
-10 − 10
Changes the feed timing for the 3rd stitch at the sewing start
263
-10 − 10
Changes the feed timing for the 3rd stitch before the sewing end
264
-10 − 10
Changes the feed timing for the 2nd stitch before the sewing end
265
-10 − 10
Changes the feed timing for the 1st stitch before the sewing end
266
-10 − 10
If the overall feed timing (setting for No. 260) is changed from the default value, specify the
number of applicable stitches.
267 0
1 − 99
Changes feed timing standard
0
268 1
2
3
Adjusts the feed motor output
269
-5 − 5
When sewing is finished, the feed plate returns to the start position.
When sewing is finished, the feed plate moves via the machine home position to
the start position.
100 mm/s Slow
200 mm/s
300 mm/s
400 mm/s
500 mm/s Fast
Feeding is normally slow, and becomes faster when the foot switch is depressed
to the 1st step
(For 2 pedals, it becomes faster when the work clamp switch is depressed.)
Test feeding is at the same speed as sewing.
* This does not apply to checking stitch by stitch.
Depress the foot switch (start switch) while the PROGRAM No. display is flashing.
Press the special external input switch (EXIN3) while the PROGRAM No. display
is flashing. (Foot switch/start switch are disabled.)
Moves to the start position simultaneously for X and Y, in the order of in front of Y
→ middle of X.
Moves to start position in the order of X start point → Y start point in the order of in
front of Y → middle of X.
Moves to start position in the order of right edge of X → Y start point → X start
point in the order of right edge of X → in front of Y.
Moves to start position in the order of left edge of X → Y start point → X start point
in the order of left edge of X → in front of Y.
-10: Early ← 0: Standard → 10: Late
-10: Early ← 0: Standard → 10: Late
-10: Early ← 0: Standard → 10: Late
-10: Early ← 0: Standard → 10: Late
-10: Early ← 0: Standard → 10: Late
-10: Early ← 0: Standard → 10: Late
-10: Early ← 0: Standard → 10: Late
No limit
The feed timing returns to the standard feed timing once the specified number of
stitches has been sewn.
[Feed start reference] Makes the timing uniform at the start of feed.
[Needle up reference] Changes the timing at the start of feed so that the needle
zigzagging is even.
[Feed end reference] Makes the timing uniform at the end of feed.
[Linked to speed] Feed timing is uniform even if the sewing speed changes.
-5: Low← 0: Standard → 5: High
Setting items
BAS-311G, BAS-326G
2. FUNCTION SETTINGS
Initial value
OFF
3
OFF
OFF
0
0
0
0
0
0
0
0
0
1
0
9