Assembly; Thread Trimmer Mechanism (1) - Brother BAS-326G Service Manual

6. ASSEMBLY

6. ASSEMBLY
Assemble each part in order of the numbers.
Apply grease to the required places when reassembling the parts and once every two years.

6-1. Thread trimmer mechanism (1)

Apply grease <GREASE BZL-301 (SA2694-001)> specified by Brother to the portions indicated by the white arrows.
When the ball joint assembly of thread trimmer rod
H has been disassembled, assemble it so that the
distance between the centers of the holes is 376 ±
0.5 mm.
Tighten the set screw on the screw flat while
lightly pressing the movable knife lever shaft.
58
Tighten the set screw on the screw flat while lightly
pressing the thread trimmer lever shaft.
5134Q
1. Movable knife lever
2. Thread trimmer rod H
3. Shoulder screw
4. Movable knife lever shaft
5. Set screw
6. Thread trimmer lever shaft
7. Retaining ring, C
8. Spacers [2 pcs]
BAS-311G, BAS-326G
5135Q
9. Thread trimmer lever H
10. Thread trimmer lever V
11. Set screws [2 pcs]
12. Shoulder screw B
13. Nut
14. Spring
15. Spring hook