Storing, Deleting, And Using Original Sizes; G Storing Or Deleting An Original Size; G Using A Stored Original Size; Storing Or Deleting An Original Size - Sharp AR-M355N Operation Manual

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
G To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.

STORING OR DELETING AN ORIGINAL SIZE

1 Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
1 /
AUTO 8 X11
2
ORIGINAL
2 Touch the key under [SCAN SIZE].
SCAN SIZE
100%
1 /
AUTO 8 X11
2
2-SIDED 2-S
BOOKLET TAB
3 Touch the [CUSTOM SIZE] key.
5R
MANUAL
5 X8 1 / 1 /
2 2
5 X8 R 1 / 1 /
CUSTOM
2 2
SIZE
STANDARD SI
4 Touch the [STORE/DELETE] key.
RECALL STORE/DELETE
5 Touch the original size key (
you wish to store or delete.
1 /
X5 Y10 1 /
2 8
RECALL STORE/DELETE
stored size, touch the key that shows the size that you
wish to delete or change.
GIf you are storing an original size, go to step 6.
GIf you are deleting an original size, go to step 8.
GIf you are changing an original size, go to step 8
and touch the [AMEND] key.
) that
To store an original size,
touch a key that does not
show a size ( ).
Keys that already have an
original size stored will show
the stored size ( ).
1 /
X5 Y10 1 /
2 8
To delete or change a
6 Enter the X (width) and Y (length) dimensions
of the original with the
X
CANCEL OK
A
Y
(2 1/2 17)
17
X
inch
(2 1/2 11 5/8)
Y
11
inch
RECALL STORE/DELETE
length of 2-1/2 to 11-5/8 inch (64 to 297 mm) can
be entered in Y.
Touch the [OK] key.
7
The original size entered in step 6 is stored in the
key selected in step 5.
To exit, touch the [ORIGINAL] key.
8 When you touch a key that shows an
original size in step 5, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
G To cancel the procedure, touch the [CANCEL] key.
G To delete the selected original size, touch the
[DELETE] key.
G To change the original size stored in the key, touch
the [AMEND] key. The screen of step 6 will appear
to let you change the size.
9 To exit, touch the [ORIGINAL] key.

USING A STORED ORIGINAL SIZE

Follow steps 1 to 3 of "STORING OR
1
DELETING AN ORIGINAL SIZE".
2 Touch the original size key that you wish
to use.
1 / 1 /
X5 Y10
2 8
RECALL STORE/DELETE
3 Touch the [OK] key.
The stored original size is called up.
keys.
X (width) is initially
selected.
Enter X and then touch
the ( ) key to enter Y.
A width of 2-1/2 to 17
inch (64 to 432 mm) can
be entered in X, and a
1-9
1