Sharp AR-M355N Operation Manual page 245

Supplementary explanation of key operation for key operator programs
KEY OPERATOR PROGRAMS
DEVICE CONTROL
A
ORIGINAL SIZE DETECTOR SETTING
DISABLING OF DUPLEX
B
DISABLING OF PUNCH
A When a key that appears in the form
B When a checkbox ( ) appears in front of a setting, a checkmark (
This indicates that the setting is enabled. If a checkbox with a checkmark (
cleared ( ) and the setting is disabled.
C If the settings continue on the following screen(s), touch the
screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
OK
DISABLING OF DOCUMENT
FEEDER
DISABLING OF STAPLER
DISABLING OF OPTIONAL
PAPER DRAWER
is touched, the setting screen of that key will appear.
XXX
and keys.
USING THE KEY OPERATOR PROGRAMS
These keys and indicator are available
on setting screens that require the entry
of numerical values.
1/3
C
D
) will appear when the checkbox is touched.
) is touched, the checkmark is
and keys to move back and forth through the
(1 999)
20
E
5