Entering Characters - Sharp AR-M355N Operation Manual

ENTERING CHARACTERS

To enter or edit characters in setting screens such as auto dial key programming screens, follow the steps below.
Characters that can be entered are alphabetical characters, special characters, numbers, and symbols.
■ ■ ■ ■ Entering alphabetical characters
(Example: Sharp äÄ)
1 Touch the [S] key.
To switch between upper case and lower case,
touch the [ABC
highlighted, upper case letters are entered.
2 Touch the [ABC
S
3 Touch the [h] key, [a] key, [r] key, and [p]
key.
Shar
If you make a mistake, touch the
the cursor ( ) back one space and then enter the
correct character. You can also press the [AB/ab
12#$%] key during entry to enter a number or
symbol.
4 Touch the [SPACE] key.
Sharp
The cursor ( ) moves forward and a space is
entered.
7-26
Characters cannot be
entered beyond the " " mark.
abc] key. When ABC is
abc] key.
key to move
5 Touch the [ ÃÄÂ/ãäâ] key.
Sharp
6 Touch the [ä] key.
Sharp
To switch between upper case and lower case,
touch the [ÃÄÂ
highlighted, lower case letters are entered.
7 Touch the [ÃÄÂ
Sharp ä
8 Touch the [Ä] key.
Sharp ä
You can press the [ABC/abc] key during entry to
return to alphabetical character entry. You can
also enter numbers and symbols.
When finished, touch the [OK] key.
9
Sharp äÄ
You will exit the character entry screen and return
to the programming screen. If you touch the
[CANCEL] key, you will return to the programming
screen without storing the entered characters.
ãäâ] key. When ãäâ is
ãäâ] key.