Sharp AR-M355N Operation Manual page 362

Problem
Printing does not take Does a message appear in the
place after reception. display instructing you to add
toner or paper? (Printing is not
possible.)
A received image Was the wrong side of the original
prints out blank. scanned
machine?
The received image Is the original faint?
is faint.
The received image Were line conditions poor due to
is distorted. thunder or another reason?
White or black lines Is the document glass dirty?
appear in the
transmitted image.
A dial tone is not Is the volume set to "low"?
heard through the
speaker.
A ringing sound is not Has the ringer volume been turned
made. off?
Check
Restore printing capability
as instructed by the display
message.
begin.
Check with the operator of
in the transmitting the transmitting machine.
Ask the other party to re-
send the document using a
suitable exposure setting.
Ask the other party to send
the document again.
Clean the document glass . Operation manual (for
Set the speaker volume to
"medium" or "high".
Set the ringer volume to
"low", "medium", or "high".
PROBLEMS AND SOLUTIONS
Solution
"WHEN
SOUNDS
Printing will WARNING MESSAGE
IS DISPLAYED", page
7-3.
general information and
copier operation), page
6-2.
"Speaker
settings", page 8-6.
"Speaker
settings", page 8-6.
Page
AN ALARM
AND A
_
_
_
volume
volume
7
7-5