Sharp AR-M355N Operation Manual page 154

SAVING A DOCUMENT IMAGE FILE
Touch the [OK] key.
9
FOLDER OK
2/2
If needed, select the
10
checkbox (only in copy mode).
FILE INFORMATION
CONFIDENTIAL
USER NAME
FILE NAME
●If
you selected
checkbox, touch the [PASSWORD] key and
enter a password.
●If you did not select the [CONFIDENTIAL]
checkbox, go to step 16. The file will be saved
as a [SHARING] file.
Touch the [PASSWORD] key.
11
CAN
PASSWORD
XYYY
Enter a 5-digit password with the numeric
12
keys.
CANCEL
ENTER PASSWORD VIA THE 10-KEY PAD.
13 Touch the [OK] key.
0
CANCEL OK
10-KEY PAD.
7-8
The touched folder is
selected and you return
to the screen of step 7.
The selected folder
name is displayed.
[CONFIDENTIAL]
When this is selected, the
file is stored with the
attribute [CONFIDENTIAL].
To call up the file, the
password that will be set in
the following steps must be
entered.
the [CONFIDENTIAL]
The password entry
screen appears.
As each digit is entered,
"-" changes to " ".
You will return to the screen of step 10.
14
The set password is displayed with " ".
CANCEL OK
PASSWORD
XYYY
15 Touch the [OK] key.
You will return to the main screen.
Press the [START] key on the operation
16
panel.
17 The saved image can be called up using
the file name, folder name, or user name,
or from the filing folder.
●To call up the image by entering the file name,
folder name, or user name, see "Searching
for and calling up a saved file" on page 7-13.
●To call up the image from the filing folder, see
"Calling up and using a saved file" on page 7-
15.
18 The following
performed on the image that was called
up:
●Print the image (page 7-16)
●Transmit the image (page 7-17)
●Change the attribute (page 7-18)
●Move the image (page 7-19)
●Delete the image (page 7-19)
●Check details on the image (page 7-19)
When copying begins,
the image is saved.
operations can be