Sharp AR-M355N Operation Manual page 113

SPECIAL MODES
Touch the [INSERTION SETTINGS] key to
8
specify the pages where you wish to insert
the insert papers of [INSERTION TYPE A
SETTING] and [INSERTION
SETTING].
CANCE
RTION
SETTING
INSERTION
SETTINGS
TION
SETTING
9 Touch the [INSERTION TYPE A] key or the
[INSERTION TYPE B] key, enter the page
number where you wish to insert the insert
paper with the numeric keys, and then
touch the [ENTER] key.
INPUT THE PAGE NUMBER AND
PRESS [ENTER]. USE [C] KEY TO AMEND.
INSERTION SETTINGS
INSERTION PAGE
INSERTION
3
TOTAL:0
ENTER
(X)
(1)(X) shows the total number of inserts. Up to 100
inserts can be added. When inserting multiple
inserts, touch the [ENTER] key after each entry
of an insertion page number (insertion position)
with the numeric keys.
(2)(Y) shows the tray selected in step 3 for
[INSERTION TYPE A SETTING] and the paper
size and type.
(3)(Z) shows the tray selected in step 3 for
[INSERTION TYPE B SETTING] and the paper
size and type.
(4)When the [INSERTION TYPE A] key is
highlighted, the insert settings apply to
[INSERTION TYPE A SETTING]. When the
[INSERTION TYPE B] key is highlighted, the
insert settings apply to [INSERTION TYPE B
SETTING].
10 Touch the [OK] key in the screen of step 9.
You will return to the screen of step 2.
5-14
TYPE B
OK
INSERTION
INSERTION
TYPE B
TYPE A
TRAY2 TRAY2
8 x11
8 x11 1 / 8 x11 1 / 1 /
2
2 2
PLAIN
PLAIN PLAIN
(Y) (Z)
If you wish to insert a different paper with
11
the [INSERTION TYPE B SETTING] key,
repeat steps 2 through 6. Use the
[INSERTION TYPE B SETTING] key instead
of the [INSERTION TYPE A SETTING] key,
and the [INSERTION TYPE B] key instead
of the [INSERTION TYPE A] key.
CANCEL
TS
INSERTION
TYPE A SETTING
INSERTION
SETTINGS
INSERTION
TYPE B SETTING
Touch the [PAGE LAYOUT] key in the
12
screen of step 11 to display a list of the
selected settings (page 5-15).
To exit the cover/insert settings, touch the
upper [OK] key in the screen of step 11.
13 Press the [START] key.
To cancel covers/inserts settings...
Touch the [CANCEL] key in the screen of step 2.
OK
OK
PAPER TRAY
SETTINGS
PAGE LAYOUT