Scheduled Automatic Reboot; Console Access - TRENDnet TEW-829DRU User Manual

TRENDnet User's Guide

Scheduled automatic reboot

Administrator > Reboot > Setting
The scheduled automatic reboot feature allows you to set a daily or weekly schedule for
the router to initiate an automatic reboot in an attempt to resolve any connectivity
issues or intermittent problems that may occur with your device. Before using the
scheduled automatic reboot feature, please ensure your Time settings are configured
correctly and you have already created a time schedule for this function.
1. Log into your router management page (see
on page 8).
2. Click on Administrator, click on Reboot, and click on Setting tab.
3. Click the Automatic reboot by schedule drop-down list and select the schedule used
for the automatic device reboot function. Click Apply to save and commit the changes.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your router management page"

Console access

Using the includes RS-232 to RJ-45 console cable, you can access the router console
command line interface management through the console port for debugging and
troubleshooting if necessary.
You can access the command line interface management of router using the terminal
emulation program settings below.
Baud Rate (bps)
Data Bits
Parity Bits
Stop Bits
Hardware Flow Control
TEW-829DRU
115200
8
None
1
Off
91