Reset To Factory Defaults; Reboot The System; Update System Firmware - TRENDnet TEW-823DRU User Manual

TRENDnet User's Guide

Reset to Factory Defaults

Advanced > Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, refer to
"Backup System Settings" on page 43.
1
Log into your router management page (refer to
2
Click on Advanced > Administrator > Settings Management.
3
In Reset to Factory Defaults section, click Load Default.
4
You are prompted to confirm to reset to factory default settings. Click OK.

Reboot the System

Advanced > Administrator > Settings Management
To reload the system parameters, you may need to reboot the router.
1
Log into your router management page (refer to
2
Click on Advanced > Administrator > Settings Management.
3
In System Reboot section, click Reboot.
4
You are prompted to confirm to reboot the device. Click OK.

Update System Firmware

Advanced > Setup > Update Firmware
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet router model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link http://www.trendnet.com/downloads/.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Log in to Management Page" on page
"Log in to Management Page" on page
In addition, it is also important to verify if the latest firmware version is newer than the
one your router is currently running. To identify the firmware that is currently loaded on
your router, log in to the router, click on the Administrator section and then on the Status.
The firmware used by the router is listed at the top of this page. If there is a newer version
available, also review the release notes to check if there were any new features you may
want or if any problems were fixed that you may have been experiencing.
To download the firmware, do the following:
8).
1
Enter the web browser URL field
the firmware to your computer.
2
Unzip the file to a folder on your computer.
ÍNote:
ͳ Do not interrupt the firmware upgrade process.
ͳ Do not turn off the device during the upgrade.
ͳ If you are upgrading the firmware, using a laptop computer, ensure that the
laptop is connected to a power source or ensure that the battery is fully charged.
ͳ Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
Do not interrupt the firmware upgrade process as it may damage your device.
IMPORTANT:
Please wait until the firmware upload has fully completed and the device has
8).
successfully rebooted.
To start the firmware upgrade, do the following:
1
Log into your router management page (refer to
2
Click on Advanced > Setup > Update Firmware.
3
In Firmware section, click Browse to load the upgrade file.
4
Navigate to the folder on your computer where the unzipped firmware file (*.bin) is
located and select it.
5
Click Apply. If prompted, click Yes or OK.
To discard the changes, click Cancel.
ÍNote:
TEW-823DRU
http://www.trendnet.com/downloads/
"Log in to Management Page" on page
and download
8).
44