Applications - TRENDnet TEW-829DRU User Manual

Ac3000 tri-band wireless gigabit dual-wan vpn smb router
Hide thumbs Also See for TEW-829DRU:
Table of Contents

Advertisement

TRENDnet User's Guide
8. To change the administrator password for the router configuration, click
Administrator and click Administration.
Note: By default, the administrator password has been pre-configured for your
convenience and can be located on the included wireless settings sticker or on the device
label located on the bottom of the router. If you are modifying the administrator
password, you will need to log into the router configuration using the new password.
9. Enter the new administrator password in the Password field and re-type the new
password in the Confirmation field. Click Apply to save and commit the changes.
© Copyright 2018 TRENDnet. All Rights Reserved.
10. To change your router's LAN IPv4 address settings, click on Network and click LAN.
11. Under Common Configuration and General Setup, enter the new LAN IPv4 address
and subnet mas in the IPv4 address and IPv4 netmask fields. Click Apply to save and
commit the changes. Please wait for the new address settings to be applied and log back
into the router web configuration page using the new LAN IPv4 address.
Note: If your computer IP address settings are not automatically updated to the new
settings, you may need to manually renew your computer IP address settings in order
for your to log back into the router web configuration with the new LAN IPv4 address
settings.
TEW-829DRU
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents