Table of Contents
Advertisement
TRENDnet User's Guide
7. Remove any settings for DNS Server 1 & 2. These are optional parameters.
8. Click the Authentication drop-down list and select MS-CHAPv2.
9. Under the User Account section, enter a profile name for the new user account and
click Add. (e.g. User1)
10. Check the Enable option and enter a User name and Password for the new user
account. (e.g. User name: user1 / Password: user1)
11. Click Apply and the bottom of the page so save and commit the changes.
12. Click on Network, click VPN, and click the IPsec tab.
13. Under Overview, enter a tunnel name and click Add. (e.g. L2TPwIPsec)
© Copyright 2018 TRENDnet. All Rights Reserved.
143. Click the Connection type drop-down list and select Remote Access (Roadwarrior).
14. Click the Authentication type drop-down list and select L2TP/IPSec PSK.
15. In the Local field enter the local WAN1 IP address and click Apply. (e.g. 10.10.10.10)
16. Under Authentication Key, enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel
and click Apply. (e.g. 1234567890)
Note: For the VPN client computer, you will require a third party L2TP with IPsec VPN
software to be installed configured matching the L2TP with IPsec VPN settings on your
router. Typically, L2TP with IPsec VPN software is pre-installed with most operating
systems. Please refer to your operating system or mobile device User's Guide/Manual for
configuring the VPN settings.
TEW-829DRU
67
Hide quick links:
Advertisement
Table of Contents
