IMPORTANT SAFETY INSTRUCTIONS
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
NEC — NATIONAL ELECTRICAL CODE
• To prevent ﬁ re, never place any type of candle or ﬂ ames on the top or near the TV set.
• To prevent ﬁ re or shock hazard, do not expose this product to dripping or splashing.
No objects ﬁ lled with liquids, such as vases, should be placed on the product.
• To prevent ﬁ re or shock hazard, do not place the AC cord under the TV set or other heavy
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it,
such materials may damage the panel surface.
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
LEAD IN WIRE
(NEC SECTION 810-20)
(NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE
(NEC ART 250, PART H)