Sharp Aquos LC-46D43U Operation Manual page 50

Other viewing options
1
2
1
2
48
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable converter connected to
the TV can be operated using 1 to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 FLASHBACK *
Press to switch between the current channel and the channel you were
3
watching immediately before.
4 CH /
4
Press CH or CH
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9, • (DOT)
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT GUIDE screen
or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
3
to tune in to a higher or lower channel.