Download  Print this page

Sharp LC-50LE442U Manual

Ip link device communication
Hide thumbs
   

Advertisement

shrp_10_6722_1.pke
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Display
Manufacturer:
Sharp
Firmware Version:
N/A
Model(s):
LC-50LE442U
Version History:
Driver
Version
Date
1
7/26/2013
Driver Notes:
The Driver has been optimized for volume.
®
IP Link
Communication Sheet
IP Link
GC
Compiler
Version
1.6.0
3.5.0
Device Interface
Notes
Initial version.
Page 1 of 4
Revision: 8/6/2013

Advertisement

Table of Contents
loading

  Related Manuals for Sharp LC-50LE442U

  Summary of Contents for Sharp LC-50LE442U

  • Page 1 For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or the controlled device manufacturer supplied documentation. Device Specifications: Device Type: Display Manufacturer: Sharp Firmware Version: Model(s): LC-50LE442U Version History: Driver IP Link Version Date Compiler Version Notes 7/26/2013 1.6.0...
  • Page 2 ® IP Link Device Interface shrp_10_6722_1.pke Revision: 8/6/2013 Communication Sheet Control Commands & States: Aspect Ratio Normal Stretch Zoom 1 Zoom 2 Full Screen Dot by Dot Cinema Toggle Channel TV (Step) Down Closed Caption Toggle Input HDMI1 HDMI2 HDMI3 Component Toggle Mute...
  • Page 3 ® IP Link Device Interface shrp_10_6722_1.pke Revision: 8/6/2013 Communication Sheet MLC60 Series Supported Commands: Aspect Ratio Normal Stretch Zoom 1 Zoom 2 Full Screen Dot by Dot Cinema Toggle Channel TV (Step) Down Closed Caption Toggle Input HDMI1 HDMI2 HDMI3 Component Toggle Mute...
  • Page 4 ® IP Link Device Interface shrp_10_6722_1.pke Revision: 8/6/2013 Communication Sheet Cable and Adapter Requirements: F/F RS232 DB9 Null Modem Serial Cable Notes for the Device: Serial communication: Port Type: RS-232 Parity: None Baud Rate: 9600 Stop Bits: 1 Data Bits: 8 Flow Control: None Pin Assignments Diagram: Note: Captive screw connector may also be used as a serial connection.