TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
CHAPTER 1. SPECIFICATIONS
[1]
[1]
[1]
LC-32SB27U)......................................... . ....... 3-1
[2]
[1]
CHAPTER 5. ADJUSTMENT
[1]
[2]
PROCEDURE ........................................ . ..... 5-25
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
LCD COLOR TELEVISION
LC-32D47U
LC-32SB27U
LC-C3237U
MODELS
CONTENTS
[1]
[1]
CHAPTER 8. OVERALL WIRING/BLOCK DIAGRAM
[1]
[2]
[1]
MAIN Unit ......................................................9-1
[2]
KEY Unit ........................................................9-5
[3]
LED Unit ........................................................9-6
CHAPTER 10. SCHEMATIC DIAGRAM
[1]
GRAM..........................................................10-1
[2]
LC-32D47U/LC-32SB27U/LC-C3237U
No. S39X5LC32D47U
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
Need help?
Do you have a question about the LC32SB27U - LC - 32" LCD TV and is the answer not in the manual?
Questions and answers
Hello Im having trouble resetting my tv after a power outage occurred. Can’t seem to reconnect with my cable network. No cables were removed. The tv doesn’t seem to want to connect to its previous setup. Any suggestions would be greatly appreciated.
To reset the Sharp LC32SB27U - LC - 32" LCD TV and reconnect to the cable network after a power outage, follow these steps:
1. Make sure the AC cord is securely plugged into the outlet.
2. Press the POWER button on the TV or remote control to turn it on.
3. If the TV does not operate correctly, unplug the AC cord, wait 1–2 minutes, then plug it back in.
4. Ensure the antenna or cable connection is properly connected to the TV.
5. Re-run the initial setup to allow the TV to automatically memorize available broadcasting channels.
These steps help the TV reconnect to the cable network.
This answer is automatically generated