Xinje XC series Hardware Manual page 42

6-4 Programming
1. When using 24V power, use 24V power on PLC main unit to avoid interfere.
2. To avoid interfere; use shielded signal cable.
Input connection:
3. Output terminals - Transistor output terminals, please use DC5V - 30VDC power.
4. Circuit insulation - Optical isolated.
5. Response time - 0.2ms.
6. Output current - Each point has 0.8A, or every 4 points 1.2A or every 8 points 2.0A
7. Open circuit leakage current - Below 0.1mA
8. The output circuit diagram:
9. Take channel 0 and channel 1 as the example:
XC series analog expansions User Manual Page 42 of 53 MANU003R2V1