Making The Basic Control Setting; Changing The Basic Control Setting - Henny Penny FlexFusion Installation Manual

6.4 Making the basic control setting

6.4.1 Changing the basic control setting

INFORMATION
INFORMATION
Requirement The unit is switched on
e
Image: Main menu
a Main menu
b FlexiHelp button
c Language selection
By entering the password "2100", the basic settings for the installation
can be displayed and changed.
The basic settings are made in the dialogue.
Advanced settings are made via the parameters for the settings.
Perform this for each unit separately.
The Main menu is displayed
1. Tap the "Equipment functions" button.
The Equipment functions menu is displayed.
2. Tap the "Equipment settings" field.
The PIN window opens.
3. Enter the password.
4. Tap the Confirm button.
The Equipment settings menu is displayed.
The basic settings can be changed (see "Equipment and
connection data").
5. Fill out the Commissioning report.
Installation instructions
Connecting the unit
a
d
d "Equipment functions" button
e Back button
b
c
29