Henny Penny FlexFusion Installation Manual page 28

Connecting the unit
INFORMATION
Requirement Unit not live
28
e
Image: Connecting the kitchen management system
a RJ45 socket
b RJ45 plug
c Cable tie
Perform this for each unit separately.
Housing opened
1. Pull the network cable into the unit through the cable gland.
2. Lead the network cable through the two ferrite rings, with one
winding through each.
3. Connect the network cable to the unit with the RJ45 plug.
4. Register the network in the basic control setting (see "Making the
basic control setting").
5. Fill out the Commissioning report.
Installation instructions
d
c
d Network cable
e Ferrite ring
a
b