Turning The Transfer Function On And Off - Sharp UX-D50 User Manual

all.book Page 73 Monday, September 1, 2003 3:46 PM
START/SPEICHER
4
Press
•
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
Checking or erasing the transfer message
To check or erase the transfer message, follow Steps 1 and 2 of the above
procedure, and then press
erase the message.

Turning the Transfer function on and off

When you go out and wish to use the Transfer function, turn it on as follows:
1
FUNKTION
Press
2
Press once and
3
Press .
4
Press to turn on the Transfer
1
function.
(Press to turn the function off.)
2
5 STOP
Press
and speak into the handset to record the message.
IEDERG./
to check the message, or
ALTEN
once and once.
3 times.
to return to the date and time display.
Transfer Function
STOP
.
to
LÖSCHEN
Display:
A.M. SETTING
TRANSFER FUNC
1=YES, 2=NO
The display briefly shows
your selection, then:
ON A.M. FAILURE
73