Copy Cut-Off - Sharp UX-D50 User Manual

all.book Page 107 Monday, September 1, 2003 3:46 PM

Copy Cut-off

When making a copy of a document that is longer than the printing paper, use
the copy cut-off setting to select whether the remaining part of the document
will be cut off or printed on a second page. The initial setting is YES (cut off
the remainder). To change the setting, follow the steps below.
1
FUNKTION
Press
2
Press once and
3
Press once.
4
Press to set copy cut-off to YES
1
(the remaining part of the document
will not be printed), or
cut-off to NO (the remaining part will be
printed on a second page).
STOP
5
Press
once and twice.
once.
to set copy
2
to return to the date and time display.
Making Copies
Display:
OPTION SETTING
COPY CUT-OFF
1=YES, 2=NO
The display briefly shows
your selection, then:
NUMBER OF RING
107