Editing And Clearing Auto-Dial Numbers - Sharp UX-D50 User Manual

all.book Page 90 Monday, September 1, 2003 3:46 PM
Sending a Fax by Automatic Dialling

Editing and clearing auto-dial numbers

If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
FUNKTION
Press
2
Press or
the display.
3
Press once.
4
Select EDIT or CLEAR:
EDIT:
1
•
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
•
Press
change, and then enter the new digit. The new digit will replace the old
digit.
•
If you do not wish to change the number, go directly to Step 6.
START/SPEICHER
6
Press
7
Make the desired changes to the name.
•
Press
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 89). The new letter will replace
the old letter.
•
If you do not wish to change the name, go directly to Step 8.
90
once and once.
until the number you wish to edit or clear appears in
CLEAR:
2
or to move the cursor to the digit or digits you wish to
or to move the cursor to the letter or letters you wish to
Display:
<NEW NUMBER>
1=EDIT, 2=CLEAR