Turning The Transfer Function On And Off - Sharp UX-A450 Operation Manual

Transfer Function
START/MEMORY
4
Press
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
Checking or erasing the transfer message
To check or erase the transfer message, follow Steps 1 and 2 of the above
procedure, and then press
message.

Turning the Transfer function on and off

When you go out and wish to use the Transfer function, turn it on as follows:
1
FUNCTION
Press
2
Press
3
Press
4
Press
1
function.
(Press
2
STOP
5
Press
34
and speak into the handset to record the message.
PLAY
once and
once and 3 times.
.
to turn on the Transfer
to turn the function off.)
to return to the date and time display.
to check the message, or
once.
STOP
.
to erase the
DELETE
Display:
A.M. SETTING
TRANSFER FUNC
1=YES, 2=NO
The display briefly shows
your selection, then:
ON A.M. FAILURE