Table of Contents
Advertisement
Turning the Transfer function on and off
When you go out and wish to use the Transfer function, turn it on as follows:
1
FUNCTION
Press
2
Press
once and
3
Press
.
4
Press
to turn on the Transfer
1
function. (To turn off, press
5
Press the number of the box for which you want the Transfer function to
operate (for the general box, press
STOP
6
Press
7
Each time the answering system receives a message in the selected box,
it will call your programmed transfer number. When you answer, you will
hear your recorded message telling you that the call is a transfer call. On
the dial pad of your phone, enter
page 66) if the general box or a personal box without a passcode was
selected in Step 5, or the box passcode number if a personal box with a
passcode was selected, and then
You can also perform any of the remote operations described in Remote
Operations later in this chapter (see page 66).
Note: When you hang up after a transfer call, the machine will not
immediately resume normal operation. If you want the machine to accept calls
immediately after a transfer call, enter
hanging up during message playback, first enter
playback, then enter
once and
once.
4 times.
2
to return to the date and time display.
twice).
Display:
A.M. SETTING
TRANSFER FUNC
1=YES, 2=NO
The display briefly shows
your selection, then:
ON A.M. FAILURE
.)
).
0
, your remote code number (see
. Your messages will play.
twice before hanging up (if
and
0
Transfer Function
to stop
65
Advertisement
Table of Contents
