Optional Reception Settings - Sharp UX-D50 User Manual

all.book Page 103 Monday, September 1, 2003 3:46 PM
Putting a call on hold
To put the other party on hold during a phone conversation, press
When this is done, they cannot hear you. You can put the handset back in the
cradle without breaking the connection. When you are ready to speak with the
other party again, pick up the handset. If you did not put the handset back in
the cradle, press

Optional Reception Settings

Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
1
FUNKTION
Press
2
Press once and
3
Press once.
4
Press to turn on the function, or
1
to turn it off.
2
STOP
5
Press
WIEDERG./
again to resume conversation.
HALTEN
once and twice.
5 times.
to return to the date and time display.
Optional Reception Settings
WIEDERG./
HALTEN
Display:
OPTION SETTING
FAX SIGNAL RX
1=YES, 2=NO
The display briefly shows
your selection, then:
CALLER-ID
.
103