Retrieving Your Messages - Sharp UX-D50 User Manual

all.book Page 76 Monday, September 1, 2003 3:46 PM
Remote Operations
If you do not want to use the Toll Saver function, you can turn it off by following
the steps below. In this case, the machine will answer after the number of
rings set with the NUMBER OF RINGS setting (see Changing the number of
rings on page 99).
1
FUNKTION
Press
2
Press once.
3
Press once.
4
Press to turn on the Toll Saver
1
function, or
5 STOP
Press

Retrieving your messages

1
Call the machine from a tone dial telephone. When your outgoing
message begins, press
•
You will hear a short beep, and the outgoing message will stop.
76
once and once.
to turn it off.
2
to return to the date and time display.
on the telephone.
Display:
A.M. SETTING
TOLL SAVER
1=YES, 2=NO
The display briefly shows
your selection, then:
RECORDING TIME