Changing The Transfer Telephone Number - Sharp UX-D50 User Manual

all.book Page 80 Monday, September 1, 2003 3:46 PM
Remote Operations
Turning the Transfer function on or off
To turn Transfer on: Press
To turn Transfer off: Press

Changing the transfer telephone number

1
Press ,
9
2
After you hear a short beep, enter the new telephone number. When
finished, press
•
To insert a pause between any two digits of the number, press
Recording a new transfer message
1
Press ,
9
2
When you hear a short beep, speak into the telephone to record the new
message.
•
The time for the transfer message is fixed at 15 seconds. After 15 seconds
(or earlier if the machine detects silence after you finish speaking), you will
hear a beep, and the new message will be played back automatically.
80
,
9 1
,
9 2
, and on the telephone.
0
.
, and on the telephone.
3
, and on the telephone.
, and on the telephone.
.