Sharp UX-D50 User Manual page 135

all.book Page 133 Monday, September 1, 2003 3:46 PM
Display messages (cordless handset)
BUSY
C (blinking)
CALLS
EMPTY
0 - 6
(a number from 0 to 6
appears)
(blinking)
When you attempt to make a phone call or page
another device (fax machine or cordless phone), the
system or other device is busy and cannot respond.
Wait until the system or device is no longer busy. This
message may also appear if the power of the fax
machine is turned off.
has been pressed to place a call on hold. To
resume the call, press
This appears when you access the Caller ID list in the
fax machine by holding down
Caller ID).
This appears if you access the fax machine's phone
book or Caller ID list and there are no numbers.
Your cordless handset is being paged (press
answer), or your cordless handset is paging the fax
machine or another cordless handset.
The cordless handset batteries are low and need
recharging. Place the cordless handset in the
charger. If this appears soon after the batteries have
been charged, the batteries may need replacement
(see page 122). If this appears during a phone call
(you will also hear beeps) and you need to continue
the call, transfer the call to the fax machine.
Messages and Signals
again.
(only if you have
to
133