Set Optional Network Servers; Configure Vlan Settings - Cisco 8831 Administration Manual

Chapter 4 Configure Security, Quality, and Network Features

Set Optional Network Servers

Optional network servers provide resources such as DNS lookup, network time, logging, and device
discovery.
To configure the (PoE) requirements, navigate to Admin Login > advanced > Voice > System. Under
Optional Network Configuration configure the following fields:
•
•
•
•
•
•
•
•
•
•
•
•

Configure VLAN Settings

If you use a VLAN, your phone voice packets are tagged with the VLAN ID.
Host Name—The host name of the phone.
Domain—The network domain of the phone. If using LDAP see the
Unified IP Conference Phone 8831 for Third-Party Call Control" section on page
Primary DNS—DNS server used by the phone in addition to the DHCP-supplied DNS servers (if
DHCP is enabled), When DHCP is disabled, this is the primary DNS server. Defaults to 0.0.0.0. If
using LDAP see the "Configure LDAP for the Cisco Unified IP Conference Phone 8831 for
Third-Party Call Control" section on page
Secondary DNS—DNS server used by the phone in addition to the DHCP-supplied DNS servers (if
DHCP is enabled), When DHCP is disabled, this is the secondary DNS server. Defaults to 0.0.0.0.
Syslog Server—Syslog server name and port for logging system information and critical events. If
both Debug Server and Syslog Server are specified, Syslog messages are also logged to the Debug
Server.
Debug Level—The debug level ranges from 0 to 3. The higher the level, the more debug information
is generated. Zero (0) means no debug information is generated. To log SIP messages, you must set
the Debug Level to at least 2. Defaults to 0.
Primary NTP Server—IP address or name of the primary NTP server used to synchronize its time.
Defaults to blank.
Secondary NTP Server—IP address or name of the secondary NTP server used to synchronize its
time. Defaults to blank.
DNS Cache TTL Ignore—When set to Yes, the DNS query results are not cached. When set to No,
the phone will cache the A/AAAA/SRV/CNAME record according to the TTL responses. Defaults
to Yes.
SSH Access— The administrator can be configure this parameter to control the SSH console.
Defaults to No.
SSH User ID—The administrator can set the User ID for SSH login. Defaults to blank.
SSH Password—The administrator can set the Password for SSH login. Defaults to blank.
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
"Configure LDAP for the Cisco
2-7.
Set Optional Network Servers
2-7.
4-5