Cisco 8831 Administration Manual page 15

Chapter 1 Get Started
View the Reboot History on the Phone Screen
Reboot History is located under Apps > Admin Settings > Status menu. In the Reboot History window,
the reboot entries are displayed in reverse chronological order, similar to the sequence that is displayed
on the phone web user interface.
View the Reboot History in the Status Dump File
The reboot history is stored in the Status Dump file
(http://<phone_IP_address>/admin/status.xml). In this file, tags Reboot_Reason_1 to
Reboot_Reason_3 store the reboot history, as shown in this example:
<Reboot_History>
<Reboot_Reason_1>[08/10/14 14:03:43]Provisioning</Reboot_Reason_1>
<Reboot_Reason_2>[08/10/14 13:58:15]Provisioning</Reboot_Reason_2>
<Reboot_Reason_3>[08/10/14 12:08:58]Provisioning</Reboot_Reason_3>
<Reboot_Reason_4>
<Reboot_Reason_5>
<Reboot_History/>
Wireless Microphone Region Setting
The Wireless Microphone Frequency Lock enhancement provides a secure Digital Enhanced Cordless
Telecommunications (DECT) frequency for wireless microphones by locking the wireless region setting.
When the Cisco Unified IP Conference Phone 8831 for Third-Party Call Control is shipped from the
manufacturer, the mask and the Wireless Microphone Region setting are already configured for a
particular region. For all devices, no matter the firmware release, no wireless region setting is available
to the user.
If your Cisco Unified IP Conference Phone 8831 for Third-Party Call Control is operating with an earlier
firmware release, you must upgrade to firmware release 9.3(4) so that the Wireless Microphone Region
can be locked. Six new firmware versions lock this setting for customers who are running firmware
versions earlier than firmware release 9.3(4).
If a device is shipped with firmware release 9.3(4) or later, its wireless region setting is set during
manufacturing to one of the following values:
•
•
•
•
•
•
For devices that are shipped with firmware release 9.3(4) and later, the wireless region cannot be
Note
changed.
If a device is shipped with firmware release 9.3(3), only one wireless region, NA (North America),
exists.
NA – North America
EU – Europe
JP – Japan
BR– Brazil
TW– Taiwan
LA – Latin America
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
Wireless Microphone Region Setting
1-5