Enable Conferencing; Enable Do Not Disturb; Configure Ring Tones; Assign A Ring Tone To An Extension - Cisco 8831 Administration Manual

Chapter 2 Customize Standard Features
Under Supplementary Services, under the transfer type you want to enable, choose Yes:
Step 2
•
•
You can also enable or disable call forwarding:
•
•
•
Click Submit All Changes.
Step 3

Enable Conferencing

To allow the user to perform call conferencing, navigate to Admin Login > advanced > Voice > Phone.
Under Supplementary Services in the Conference Serv field, choose Yes to enable.

Enable Do Not Disturb

You can allow users to turn the Do Not Disturb feature on or off. This feature plays a message to the
caller saying the user is unavailable. On the Cisco Unified IP Conference Phone 8831 for Third-Party
Call Control, the users can press the Ignore softkey to divert a ringing call to another destination.
This feature is not configurable on web page, and only applicable using the LCD soft key.

Configure Ring Tones

Click Admin Login > advanced >Info > Download Status and scroll to the Downloaded Ring Tone
section to see the status of the ringtone download.

Assign a Ring Tone to an Extension

To assign a ring tone to an extension:
Click Admin Login > advanced > Voice > Extension tab.
Step 1
Step 2 Under Call Feature Settings in the Default Ring field, choose from the following:
•
•
Step 3 Click Submit All Changes.
Attn Transfer Serv—Attended call transfer service. The user answers the call before transferring it.
Blind Transfer Serv—Blind call transfer service. The user transfers the call without speaking to
the caller.
Cfwd All—Forwards all calls.
Cfwd Busy—Forwards calls only if the line is busy.
Cfwd No Ans—Forwards calls only if the line is not answered.
No Ring
1 through 10
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
Configure Ring Tones
2-5