Cisco 8831 Administration Manual page 17

Customize Standard Features
This chapter describes customizing the Cisco Unified IP Conference Phone 8831 for Third-Party Call
Control and contains the following sections:
•
•
•
•
•
•
•
Configure Phone Information and Display Settings
The phone web user interface allows you to customize settings such as the phone name, background
picture, logo, and screen saver.
Configure the Phone Name
Navigate to Admin Login > advanced > Voice > Phone.
Under General, enter the Station Display Name for the phone. This name displays on the phone LCD
GUI in the top left corner.
Customize the Startup Screen
You can create a text or 128-by-48 pixel by 1-bit deep image logo to display when the conference phone
boots up. A logo displays during the boot sequence for a short period after the Cisco logo displays.
Configure Phone Information and Display Settings, page 2-1
Enable Call Features, page 2-4
Configure Ring Tones, page 2-5
Configure Audio Settings, page 2-6
Enable and Configure the Phone Web Server, page 2-6
Configure LDAP for the Cisco Unified IP Conference Phone 8831 for Third-Party Call Control,
page 2-7
Configure BroadSoft Settings, page 2-10
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
2
C H A P T E R
2-1