Cisco 8831 Administration Manual page 94

Voice
Parameter
Directory User ID
Directory Password
LDAP Corporate Directory Search
Parameter
LDAP Dir Enable
LDAP Corp Dir Name
LDAP Server
LDAP Auth Method
LDAP Client DN
LDAP Username
LDAP Password
LDAP Search Base
LDAP Last Name Filter
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
A-20
Appendix A Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Field Reference
Description
BroadSoft User ID of the phone user; for example,
johndoe@xdp.broadsoft.com.
Alphanumeric password associated with the User ID.
Description
Choose Yes to enable LDAP.
Enter a free-form text name, such as "Corporate Directory."
Enter a fully qualified domain name or IP address of LDAP
server, in the following format:
nnn.nnn.nnn.nnn
Select the authentication method that the LDAP server
requires. Choices are:
None—No authentication is used between the client and the
server.
Simple—The client sends its fully-qualified domain name and
password to the LDAP server. Might present security issues.
Digest-MD5—The LDAP server sends authentication options
and a token to the client. The client returns an encrypted
response that is decrypted and verified by the server.
Enter the distinguished name domain components [dc]; for
example:
dc=cv2bu,dc=com
If using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the client DN
follows:
cn="David Lee",dc=users,dc=cv2bu,dc=com
Enter the username for a credentialed user on the LDAP
server.
Enter the password for the LDAP username.
Specify a starting point in the directory tree from which to
search. Separate domain components [dc] with a comma. For
example:
dc=cv2bu,dc=com
This defines the search for surnames [sn], known as last name
in some parts of the world. For example, sn:(sn=*$VALUE*).
This search allows the provided text to appear anywhere in a
name, beginning, middle, or end.