Configure A Sip Proxy Server - Cisco 8831 Administration Manual

Configure SIP
Parameter
Auth Resync-Reboot
SIP Remote-Party-ID
Refer-To Target Contact Indicates the refer-to target. Select Yes to send the SIP Refer to the contact.
SIP Debug Option
Sticky 183
Auth INVITE
User Equal Phone

Configure a SIP Proxy Server

To configure SIP proxy and registration parameters, navigate to Admin Login > advanced > Voice >
Extension. Under Proxy and Registration, configure the following fields:
Parameter
Proxy
Outbound Proxy
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
3-8
Description
The Cisco Unified IP Conference Phone 8831 authenticates the sender when
it receives a NOTIFY message with the following requests:
• resync
• reboot
• report
• restart
XML-service
•
Select Yes to enable. Defaults to Yes.
The Remote-Party-ID header to use instead of the From header. Select Yes
to enable. Defaults to Yes.
Defaults to No.
How SIP messages are received at or sent from the proxy listen port to the
log. Select:
Default—No messages.
•
Current—Logs all the current SIP messages in full text
•
Full—Logs all SIP messages in full text.
•
When enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable this
feature, select Yes. Otherwise, select No. Defaults to No.
When enabled, authorization is required for initial incoming INVITE
requests from the SIP proxy. To enable this feature, select Yes. Defaults to
No.
When a tel URL is converted to a SIP URL and the telephone number is
represented by the user portion of the URL, the SIP URL includes the
optional :user=phone parameter (RFC3261). For example:
To: sip:+12325551234@example.com;user=phone
To enable this optional parameter, select Yes. The default value is No.
Description
SIP proxy server and port number set by the service provider for all
outbound requests. For example: 192.168.2.100:6060.
The port number is optional. The default is port 5060.
All outbound requests are sent as the first hop. Enter an IP address or
domain name.
Chapter 3 Configure SIP and NAT