Cisco 8831 Administration Manual page 89

Appendix A Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Field Reference
Regional
Control Timer Values (sec)
Parameter
Interdigit Long Timer
Interdigit Short Timer
Time
Parameter
Set Local Date (mm/dd)
Set Local Time (HH/mm)
Time Zone
Time Offset (HH/mm)
Ignore DHCP Time Offset
Description
Long timeout between entering digits when dialing. The
interdigit timer values are used as defaults when dialing. The
Interdigit_Long_Timer is used after any one digit, if all valid
matching sequences in the dial plan are incomplete as dialed.
Range: 0–64 seconds.
Defaults to 10
Short timeout between entering digits when dialing. The
Interdigit_Short_Timer is used after any one digit, if at least
one matching sequence is complete as dialed, but more dialed
digits would match other as yet incomplete sequences. Range:
0–64 seconds.
Defaults to 3.
Description
Sets the local date (mm represents the month and dd
represents the day). The year is optional and uses two or four
digits.
Sets the local time (hh represents hours and mm represents
minutes). Seconds are optional.
Selects the number of hours to add to GMT to generate the
local time for caller ID generation. Choices are GMT-12:00,
GMT-11:00,..., GMT, GMT+01:00, GMT+02:00, ...,
GMT+13:00.
Defaults to GMT-08:00.
This specifies the offset from GMT to use for the local system
time.
When used with some routers that have DHCP with time offset
values configured, the 3PCC phone uses the router settings
and ignores the phone time zone and offset settings. To ignore
the router DHCP time offset value, and use the local time zone
and offset settings, choose yes for this option. Choosing no
causes the IP phone to use the router's DHCP time offset
value.
The default value is Yes.
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
Voice
A-15