Hobby ONTOUR 2018 Operating Manual page 54

6. Interior structure
Pushlock safety catch
Widening the seating bench
Bed extension in the seating area
(or model-specific)
In some models, the narrow section of the seating arrangement can
be widened into a bed.
Conversion
• Press the outer panel
• Lay the outer panel
1
inner panel
• Hook the outer panel
panel
Carry out this procedure in reverse order to convert the bed back
into the seating arrangement.
2
3
Single beds, Island beds
When converting seating areas into beds, do not
place the cushions directly on the tabletop as this
may cause scratches or mildew due to condensation.
We recommend that you use an absorbent cloth (e.g.
terry cloth or cotton).
In some models, the cushions hang over the edge of
the table after the seating area has been converted into
a bed. They can be damaged if they are bent or folded
over the edge.
Ensure that the tabletop, seat bases and/or covers as
well as cushions are well secured so that nothing falls.
j
to unlock the bed extension.
l fully on the floor in order to raise the
k
.
l underneath the groove of the inner
k
.
When driving, push the bed expansion back into place
and use the pushlock to lock it.
All of the Island beds and longitudinal singles have been
designed and tested to hold up to 100 kilos per person.
When setting up the beds, lift them carefully to prevent
the adjoining furniture from being scratched.
*
50