Hobby 400 SB Excellent Easy Operation Manual

Hobby camper motor home operation guide
Table of Contents

Advertisement

Operation Guide
Camper
Weltweit Nummer 1

Advertisement

Table of Contents
loading

Summary of Contents for Hobby 400 SB Excellent Easy

  • Page 1 Operation Guide Camper Weltweit Nummer 1...
  • Page 2 Dear Motor Home Owners, We would like to congratulate you on the purchase of your new HOBBY motor home and hope that you will always enjoy traveling with it. Please read this manual carefully, even if you have been driving a motor home for a longer period of time.
  • Page 3: Table Of Contents

    Table of Contents Introduction ......................01-1 1.1 General information ...................01-1 1.2 Markings in these operation instructions ............01-2 Safety ........................02-1 2.1 General information ...................02-1 2.2 Before and during the drive ................02-1 2.3 Guidelines for the trip ..................02-4 2.4 Emergency equipment ..................02-9 2.5 Maximum speeds ....................02-11 2.6 After the drive ....................02-15 Undercarriage and vehicle registration ..............03-1 3.1 Undercarriage ....................03-1...
  • Page 4 Interior structure ......................07-1 7.1 Opening and closing doors and flaps ..............07-1 7.2 Oval media storage cupboard ................07-2 7.3 Windows ......................07-3 7.4 Roof bonnets .....................07-5 7.5 Seat chests and conversion of beds ..............07-7 7.6 Children's beds ....................07-9 Water.........................08-1 8.1 Water supply ......................08-1 8.2 Water flushing toilet ...................08-3 8.3 Warm water supply via Truma-Therme ............08-8 Gas ...........................09-1 9.1 General safety rules for the use of liquid gas facilities ........09-1 9.2 Gas supply ......................09-3...
  • Page 5: Introduction

    1.1 General information Your HOBBY camper has been built in accor- dance with the latest technology and recognis- ed safety regulations. Despite all of these safety measures, it is possible that people may be hurt...
  • Page 6: Markings In These Operation Instructions

    Annual leak checks are not free of charge. Warning: If no leak inspection is performed, your right to the 5-year guarantee loses its validity. 1.2 Markings in these operation instructions Markings in these operation instructions The handbook explains the camper as follows: Texts and illustrations The texts which accompany illustrations are found directly to the right of the illustrations.
  • Page 8: Safety

    2. Safety 2.1 General information This chapter includes important safety instruc- tions which will protect both people and property in the camper. • Ensure that there is sufficient ventilation. Built- in forced ventilation (roof bonnets with forced ventilation or mushroom roof ventilators) must never be covered.
  • Page 9 Exterior Go around the carriage and prepare for the drive as follows: Preparation of the vehicle • The camper must be hitched properly (see guidelines for the safety hitch WS3000). • The pull rope must be connected to the base vehicle.
  • Page 10 Interior You must also prepare the interior of the vehicle. Preparing the interior: • Sort all loose objects and store them in their respective compartments. • Heavy and/or voluminous objects (e.g. TV/ radio) should be stored safely and secured against slipping. •...
  • Page 11: Guidelines For The Trip

    • Are all passengers restrained in the base vehicle with seatbelts? • Have all passengers exited the camper? Staying in the camper during the drive is prohibited by law! In the event of an accident, passengers can be hurled out and sustain po- tentially fatal injuries.
  • Page 12: Drawbar Load

    The gross vehicle weight rating in- dicated in the vehicle documents as well as the permitted drawbar load may not be exceeded. Also note the permissible drawbar load of your base vehicle. Providing your base vehicle permits this and depending on the size of the camper, you can improve the driving quality by increasing the drawbar load.
  • Page 13 . Determine the maximum drawbar load of your base vehicle by checking its documentation, the type plate or the drawbar plate. 2. Your HOBBY camper has a maximum per- missible drawbar load of 100 kg. 3. Adjust the drawbar load on the camper to the lower of the two values by loading it careful- ly.
  • Page 14 longer than that of an individual vehicle. The load in the caravan also has a significant influence on the braking distance. Rules for braking • Note the longer braking distance on wet roads. • When driving down mountains or steep hills, do not use a higher gear than when driving uphill.
  • Page 15: Driving In Reverse

    Slight counter-steering can eliminate this effect. Driving in reverse Your HOBBY camper has a braking system with automatic reverse. This makes driving in reverse possible without activating the overrunning brake. However, in addition to rolling resistance, the resi- dual brake force must first be overcome.
  • Page 16: Emergency Equipment

    2.4 Emergency equipment To be prepared for an emergency, you need at lest three basic items of rescue equipment (first aid kit, warning triangle and fire extinguisher) which you should carry at all times and know how to use. First aid kit The first aid kit (standard equipment) should be 100 m within reach at all times and have a fixed place...
  • Page 17 Fire prevention measures • Never leave children unattended in the vehicle. • Keep flammable materials away from all hea- ting and cooking appliances. • Changes to the electrical system, gas system or built-in devices may only be carried out by professional, authorised workshops.
  • Page 18: Maximum Speeds

    2.5 Maximum speeds 1. Your HOBBY camper is technically equipped for a maximum speed of 100 km/h. Under no circumstances may this speed be exceeded! 2. Note the permissible maximum speeds for trailer carriages in the country in which you are travelling! 3.
  • Page 19 Speed Regulation in Europe (km/h) Motorway Within outside city limits city limits Country Cars Trailer Carriages Belgium 120 [a] Bosna-Herzeg. Bulgaria 120 [a] Germany 50 [b] 130 [c] 80 [d] Denmark Estonia Finland France 90 [e,f,g] 130 [f,g] 130 [a] Greece 90 [t] Great Britain...
  • Page 20 Netherlands 80 [i] Norway 80 [l] Austria 130 [m] 100 [n] Poland 50/60 [w] 90 [i] Portugal 120 [o] Romania 100 [p] Sweden 80 [q] Switzerland 80 [i] Serbia/Monten. 80 [i] Slovakia Slovenia 90 [i] Spain 90 [i] 90 [v] The Czech Repub.
  • Page 21 Hungary 90 [e] Cyprus Stand 06/2005 Please note: If a german trailer carriage is involved in an accident at a speed of more than 100 km/h, you may except only limited insurance benefits, because due to their construction campers in Germany are only licensed up to 100 km/h [b] In many areas, zones have been set up in which the maximum speed is limited to 30 km/h [c] Recommended speed [d] Maximum speed of 100 km/h under certain circumstances...
  • Page 22: After The Drive

    2.6 After the drive Choosing a parking place Rules for choosing a parking place: • The parking place should be as horizontal as possible. • Check to see that the entry step is positioned horizontally (important for refrigerator func tion). •...
  • Page 23 02-...
  • Page 24: Undercarriage And Vehicle Registration

    For the sake of traffic safety, the vehicle under- carriage must be maintained just as conscien- tiously as the base vehicle itself. This mainte- nance should be conducted by your HOBBY dealer. If spare parts are needed, only those original parts designated by the manufacturer should be used.
  • Page 25 The camper's turning rod spring axle unit is equipped with compact wheel bearings. The cylinder hub, compact bearings and axle nuts form a closed unit. The compact bearings are free of maintenance due to their special grease. The wheel brake may never be repositioned on the fixing lock or on the yoke end of the bars! Only reposition the wheel brake on...
  • Page 26 Safety coupling WS 3000 The camper is equipped with an anti-rolling cou- pling in accordance with ISO 11555-1. This safety coupling stabilises the camper while driving and ensures better driving performance. Please note the additional operating instructions and the manufacturer's safety instructions. WARNING: The laws of physics cannot be defied with a safety hitch.
  • Page 27 Activation of the stabilization system • To activate the stabilization system, the operation lever must be moved downward out of the closed position () until it locks in (3). The spring corpus will become tense in the process, so that contact pressure is created on the coupling ball via the friction elements.
  • Page 28 Maintenance Coupling ball on base vehicle The coupling ball should be dimensionally stable, free of damage, clean and free of grease. When using dacromet-coated (dull silver anti- corrosion coating) as well as lacquered coupling balls, the coating must be removed completely with sandpaper (00-0 grain) so that it does not create deposits on the friction lining.
  • Page 29 Noises Certain noises can occur during the course of the drive; these noises, however, have no influence on the operative effectiveness of the tension ball coupler. Possible causes of these noises can be: . a dacromet-coated coupling ball on the base vehicle, 2.
  • Page 30: Vehicle Registration

    3.2 Vehicle registration Every vehicle which uses public roads is subject to registration. This includes your new camper. You can register the camper at your local regis- tration office. The following documents are required to initiate the registration process: - motor vehicle registration certificate, Part II - insurance card - personal identification or proof of residence - possibly, power of attorney to have someone...
  • Page 31: Definition Of Mass (Weight)

    5. Additional equipment Additional equipment includes all items not part of the standard equipment preinstalled in the HOBBY factory or by the dealer. This also includes installations by special request. The mass in running order refers to the vehicle as originally equipped by the dealer or factory.
  • Page 32: Rotating Stanchions

    If you are not sure whether you have overloaded the vehicle, weigh your vehicle on a public vehicle scale. Overloading can lead to malfunction or even tire blowout! This presents the danger of the vehicle spinning out of control, which endangers you as well as other dri- vers and pedestrians.
  • Page 33: Entry Step Tread

    3.6 Entry step tread When entering and exiting the vehicle: • Place step tread in front of the entry door to the camper. • Ensure that the step tread is placed on a level surface; this prevents the step tread from falling over. Note the varied tread heights and, when exiting, ensure you will step onto firm and even ground.
  • Page 34: Overrunning Brake Facilities

    3.8 Overrunning brake The brake system must be inspected after driv- ing ,000 km. If the tension ball coupler can be facilities pushed in by hand to more than a third of the usable overrunning path (approx. 30 mm), the brake facilities must be adjusted.
  • Page 35 03-...
  • Page 36: Wheels, Tires

    4. Wheels, tires 4.1 Tires Only use those tires designated in the registra- tion documents. Other tire sizes may only be used with the permission of the manufacturer (ABE). • Check tires regularly to ensure that the tread is worn down evenly; check tread depth; check for external damages.
  • Page 37: Profile Depth And Age Of Tires

    The correct tire pressure is given in the table on wheels/tire pressure found under "Technical Information" or on the labels in the gas-bottle container and on the wheel cover. If snow chains are used, note the manufacturer's assembly instructions. You may not use snow chains if you are using tire size 95/70 R 5 C.
  • Page 38: Rims

    4.4 Rims Use only those rims indicated in the general op- erating permission documents. If you would like to use other rims, you must consider the follow- ing points: Rules for the use of other rims: - Size, - mechanisms, - compression depth and - the load/bearing capacity must be sufficient for the permissible total mass.
  • Page 39: Changing The Tire

    4.5 Changing the tire Preparing to change the tire • If possible, only change the tire when the base vehicle is coupled to the camper. • Park the trailer carriage on as firm and even a surface as possible. • If you have tire trouble on a public road, turn on your hazard warning signal lights and set up the warning triangle.
  • Page 40 Warnings for changing the tire: Only use the specifically designated jack for the corresponding frame parts. For example, on the axle pipe corre- sponding to the swinging lever group or on the stringer in the area of the axle fasteners. Damage or even an accident result- ing from the vehicle's toppling over can occur if the jack is applied to other parts of the vehicle.
  • Page 41 • Lower the jack and remove it. • Tighten the wheel fatening screws evenly with the wheel wrench. The nominal value of the attachment torque is 0 nm for steel rims and 20 nm for aluminium rims. • Release the handbrake and reactivate the stabilization system.
  • Page 42 D Hold the bottle down with the filling tube and then press them together. Press the entire bottle contents into the tire. Pull the fill hose off () and screw the valve insert (2) tightly into the tire valve with the valve-core remover (3). E Open the air hose (5) on the tire valve. Insert the plug (6) into the cigar lighter socket. Then pump the tires (Fig. 7). do not operate the electric air pump longer than 8 minutes! Danger of overheating! If sufficient air pres- sure is unattainable, drive 0 meters (either...
  • Page 43 04-8...
  • Page 44: Exterior Structure

    5. Exterior structure 5.1 Forced ventilation/de-aerating Rules for forced ventilation Proper ventilation and de-aerating of the vehicle is a prerequisite for ideal living comfort. A draft- free forced-ventilation system is located in the floor and a forced de-aerating system is located in the ceiling which should not be interfered with.
  • Page 45 Refrigerator The ventilation bars provide the refrigerator with fresh air from outside to ensure sufficient cooling performance. The ventilation bar is located at the bottom of the exterior vehicle wall. The de-aera- tion bar is located above the ventilation bar. there is a danger of suffocation if ventilation openings are blocked! Therefore, do not block ventilation...
  • Page 46: Vehicle Keys

    5.2 Vehicle keys The following keys are provided with the camper: - Two keys which fit into the following locks: - entry door, - service flaps, - toilet flap. Entry door To open: • Unlatch the lock with the key. •...
  • Page 47: Toilet Flap

    Gas-bottle container flap To open: • Unlatch the lock () with the key. • Grip handle and open flap. To close: • Turn the flap back until it locks in. • Latch the lock with the key. Toilet flap To open: •...
  • Page 48: Exterior Mirrors

    5.3 Exterior mirrors The base vehicle must be equipped with two mirrors to operate the trailer. The exterior mirrors must ensure that the lanes surrounding the trailer are sufficiently visible. For safety reasons, the exterior mir rors on the base vehicle must always be properly adjusted before each drive.
  • Page 49: Entry Door

    5.5 Entry door To open: • Turn the latch in the direction of the hinge. In this manner, a door locked from the outside can be opened from the inside. To close: • Turn the latch away from the hinge The entry door is your escape route in an emergency.
  • Page 50: Installation Of Electrical Devices

    6. Installation of electrical devices 6.1 Safety tips The installation of electrical devices in the HOB- BY camper have been carried out in accordance with the valid regulations and norms. Please note: • Do not remove safety tips and warnings on the electrical equipment.
  • Page 51: Service Panel

    6.2 Service panel Push-button Function 1 Heating system On/off switch - red LED shows function. 2 Floor heating On/off switch - red LED shows function. (not standard equipment) 3 Light in outer tent On/off switch for light in outer tent. 4 Wall lamps On/off switch for lamps.
  • Page 52: Remote Control

    Secondary panel 1 Sleeping area Push-button Function Left On/off switch for mounted spotlight on left side of bed. Holding the push-button activates the dimmer function. Light increases and decreases. Centre On/off switch for ceiling lamp over suite. Holding the push-button activates the dimmer function. Light increases and decreases.
  • Page 53: Electrical Supply

    6.3 Electrical supply Electricity for the camper can be obtained from the following connections: - 230 V mains connection 50 Hz. () via the base vehicle if it is connected using the 3-pole plug (limited functions) - via a built-in auxiliary battery (not included). Everything that uses 2 V, such as lighting, water supply, etc., is available.
  • Page 54 Rules for the mains connection: • Use only a 3 x 2.5 mm cable with a maximum length of 25 m, a CEE plug and connector to connect the camper to an external 230 V mains. Cable drums must be completely un- wound, as otherwise there is a great risk that the cable may burn (fire caused by induction, which results in the cable's heating up).
  • Page 55: Function Of The Electrical Supply Unit

    The integrated antenna connection can be used as an entry or exit sleeve, according to your preference. You can get more detailed infor- mation from your HOBBY dealer. Operation via battery During the drive, the battery of the base vehi-...
  • Page 56 6.5 Truma-Vent-Gebläse The camper is equipped with an air circulation unit (equipment varies according to each mo- del). This unit distributes the warm air from the heating element throughout the entire interior. The desired level can be adjusted by the turning know.
  • Page 57: Changing The Taillight Bulbs

    6.6 Changing the taillight bulbs Carefully remove the protective caps with a screwdriver. Remove the four fastening screws with a crosstip screwdriver. Now you can remove the taillight from the frame. Remove the holder by loosening the screw. The bulbs are now freely accessible. Put the taillight back together by repeating the process in reverse.
  • Page 58: Circuit Diagram (Interior)

    6.7 Circuit diagram (interior) Models: Excellent / Prestige Hobby Light Control System 2007 06-9...
  • Page 59: Circuit Diagram (Exterior)

    6.8 Circuit diagram (exterior) 06-0...
  • Page 60 "Jäger" outlet (13-poled) View from connection side Contacts of sockets in accor- dance with DIN 1648-1:97 06-...
  • Page 61: Lighting In The Camper

    6.9 Lighting in the camper (switched using the service panel) Circumferential halogen spotlights above the suite (from "Excellent" model onwards) Corner shelf with integrated lamp can be swit- ched on/off separately. Indirect lighting above stowage cupboards by the suite and kitchen with additional rotating spotlight.
  • Page 62 Indirect lighting above the windows by the round sitting area. Ceiling lamp above suite (can be dimmed). Lamps in clothes cupboard. 06-3...
  • Page 63: Electric Floor Heating

    6.10 Electric floor heating (Not part of standard delivery; available as an extra) The heating is located in the middle walking strip of the floor; it is 60 cm wide. The length depends on the camper model. This heating is not meant to heat the room; instead, it serves to prevent loss of heat through the floor.
  • Page 64: Furniture Flaps With Handle

    7 Interior structure 7.1 Opening and closing doors and flaps Furniture flaps with handle To open: • Pull the handle until the flap opens. To close: • Press the flap on the handle until you feel the flap shut. Close all flaps before driving off. This will prevent accidental opening dur- ing the drive which could cause objects to fall out. Furniture doors Bathroom door handle Furniture doors with knob Clothes cupboard 07-...
  • Page 65: Oval Media Storage Cupboard

    7.2 Oval media storage cupboard (rotating TV/bar) Rotating TV/bar, with connection for 15" flat screen TV and LED lighting. Connections are located in the L part of the kitchen. To swing the oval media storage cupboard out, unlock the integrated snap-in lock (1). 07-...
  • Page 66: Windows

    7.3 Windows Hinged windows To open: The window can be adjusted to open at varying degrees: • Turn the latch into the vertical position. • Press the window outward until you hear a click. The window automatically remains in this position. Windows by the children's beds are secured against accidental opening, to effectively prevent children from falling out. To shut: • Lift the window slightly outward so that the hinge disengages. • Close the window. • Turn the latches (1) and (2) into the vertical position. Separate shades and insect screens The shades and insect screens are integrated in the window frame. The shade can be adjusted to seveal positions. To shut the shade: •...
  • Page 67 To shut the insect screen: • Pull the insect screen (3) completely down with the strap (4) and let go. The screen re mains in this position. To open the insect screen: • Pull the insect screen (3) slightly down with the strap (4) and then guide it upward. The screen rolls upward automatically. Do not let the shade or the insect screen fly upward! The shades and insect screens should be left open when the cara- van is not in use in order to avoid consequential damage. 07-...
  • Page 68: Roof Bonnets

    7.4 Roof bonnets Safety instructions - Never open the roof bonnets in a strong wind or when it is raining, hailing, etc., or if the outside tem- perature is below -20° C! - Before opening, remove snow, ice or heavy dirt. Make a note of the required space needed before opening the roof bonnet under a tree, in a garage, etc. - Do not step on the roof bonnet. - Close and lock roof bonnets be- fore driving. Open insect screen and shade (home position). - Close shade only 3/4 of the way if the sun shines in strongly; danger Panorama thermal roof bonnet of heat accumulation! The openings for the forced venti- lation system must always be left open! Never close or cover forced ventilation systems! To open the bonnet: Before opening the bonnet, make sure the...
  • Page 69 Shade The shade is infinitely variable; simply pull the handle to the desired position or until the lock snaps into the handle of the insect screen. Opening/closing the insect screen Use the handle to push the insect screen against the shade until the lock snaps into the handle. 07-6...
  • Page 70: Seat Chests And Conversion Of Beds

    7.5 Seat chests and conversion of beds The seat groups can be converted into comfor- table beds. Elevating table model Conversion: • Remove the seat and back cushions. • Pull the latch of the table frame upward and release. • Pull the latch of the table frame towards the interior of the vehicle and lower the table. • Replace the seat cushions and pull themto the middle of the table. • Fill the empty spaces with the back cushions. To do this, turn the back cushions (2) around and lay them with the wider side against the front or standing wall. • The back cushion (3) should be placed ver tically into the gap to fill the remaining space in vehicles with a width of 2.5 m. Ensure that the tabletop, seat chests and/or covers as well as cushions are well secured so that nothing falls. 07-7...
  • Page 71 Bed expansion for vehicles with rear seat group. Setting up the beds left backrest right seat right seat left seat right backrest 07-...
  • Page 72: Children's Beds

    7.6 Children's beds • Windows by the children's beds are secured against accidental opening, to effectively pre vent children from falling out. Be careful when using the upper bed for small children, as there is a danger that they may fall out. Small children should never be left unat- tended in the caravan. • Switch children's lamp on/off using the bear's rotatable "nose". The lamp can be dimmed and adjusted for use as a nightlight ("blue ears"). 07-...
  • Page 73 07-0...
  • Page 74: Water

    8. Water 8.1 Water supply Function of the water supply Water is provided to the kitchen and toilet area via an immersion pump. The immersion pump functions on electricity: - via a 2 volt automobile battery if the camper is connected via a plug to the base vehicle, - via a transformer if the camper is connected to the 230 volt main.
  • Page 75: Service Flap

    22 l fresh water tank with service flap The fresh water tank can be rolled or carried. To add water: • Open the service flap. • Remove the screw connector and pull the immersion pump from the fresh water tank. • Pull out the canister. •...
  • Page 76: Water Tank

    50 l fixed tank from 540 series onwards The tank has a volume of 50 liters. The filler neck on the side wall is used to fill the fresh water tank. Emptying the tank and overflow when overfilled The water can be emptied from the tank by un- screwing the overflow pipe. Built-in fresh water tank with water level detector (50 l).
  • Page 77 3. Turn the water funnel outwards, remove the cap and place the extension over the funnel. Pour the required amount of Thetford toilet additive into the water tank. This ensures better flushing and cleansing and keeps the water in the fresh water tank fresh. . Fill the water tank with fresh water. Ensure that the water level is below the water funnel.
  • Page 78 8. Set the faeces tank upright and turn the pou- ring stanchion upward. 9. Turn the lid of the pouring stanchion with the measuring cup on the inside, and pour the required amount of toilet-bowl cleaner into the faeces tank. This prevents odours in the faeces tank and keeps the inside of the tank clean.
  • Page 79 3. After use, open the valve (if it is still closed) by turning the lever counterclockwise. Flush the toilet by pressing the flush knob for seve- ral seconds. Close the valve after use. Never leave water in the bowl when the toilet is not in use. This does not reduce odours and can only lead to a blockage.
  • Page 80 8. Push the lever back. Turn the pouring stan- chion upwards and remove the cap from the pouring stanchion. Hold the faeces tank in one hand, using its upper handle, and keep the other hand on the rear handle, enabling you to operate the ventilation knob with your thumb when you empty the tank.
  • Page 81: Warm Water Supply Via Truma-Therme

    23. Return the faeces tank to its position and open the valve by turning the lever on the toilet to the left. 8.3 Warm water supply via Truma-Therme Rules for warm water supply: • Only use water suitable for drinking. Note the user's guide before first use! To fill the therme:...
  • Page 82: Electric Operation

    Emptying the therme: • Disconnect the electricity supply to the water pump on the main switch or transformer. • Open all faucets. • Set all pre-mixing valves to "warm" if neces- sary. • Open the runoff valve (). • Check to see if water runs out. • Close the runoff valve () after emptying (if Plan for warm water supply necessary, blow the line out).
  • Page 83 08-0...
  • Page 84: Gas

    9. Gas 9.1 General safety rules for the use of liquid gas facilities The gas operation pressure is 30 mbar. Inspection of the gas facilities • Hae the gas facilities checked by an expert before the first use. • The gas facilities should be inspected by an expert every two years.
  • Page 85: Waste Gas

    • Connect the regulator knobs very carefully by hand. do not use keys, pliers or similar tools. • Use the de-icing system (Eis-Ex) for the regulator knobs when the temperature drops below 5° C. Waste gas • The waste gas pipe must be tightly attached to the heating element and the flue.
  • Page 86: Gas Supply

    9.2 Gas supply The camper is equipped with propane gas facilities. These facilities opeate the following devices: cooker refrigerator heating element warm water boiler, if necessary special equipment, if necessary - baking oven, if necessary Bottle container The gas-bottle container holds two  kg bottles of propane gas (1).
  • Page 87 Changing gas bottles: Never smoke or light open fires when changing gas bottles. After changing bottles, check whether gas is escaping from the points of attachment by spraying these with a leak indicator. • Open the flap of the gas-bottle container. •...
  • Page 88: Heating Element

    9.3 Heating element Heating element S 5002 and S 3002 Heating while driving is forbidden. Above: S 5002 (models 560 to 750) Below: S 3002 (models 400 to 540) Place of installation: in the closet or the corner of the flue Before first use: •...
  • Page 89 • If the flame extinguishes again, re-ignition takes place during the closing phase of the fusible cut-out of the ignition safety switch (approx. 30 seconds). • If no flame is ignited, the control light blinks. • If the control light does not come on at all during the ignition process, the batteries in the automatic ignitor (2) must be replaced.
  • Page 90: Refrigerator

    Refrigerator Your camper is installed with a refrigerator made by Dometic or Thetford. Please follow the separate operating instructions provided by the manufac- turer. Methods of operation The refrigerator can be operated in three diffe- rent ways: 12 V operation: electrical supply from the bat- tery of the base vehicle (ignition lock on), 230 V operation: electrical supply from an external source,...
  • Page 91: Gas Cooker

    9.5 Gas cooker The kitchen segment of the camper is equipped with a 3-flame gas cooker. Before first use: • Open the bottle valve and the quick-close valve in the gas line. • The roof ventilation or the window must be open while operating the gas cooker.
  • Page 92: Hot-Water Heating System

    Use potholders or mitts when hand- ling hot pots, pans and similar ob- jects. Danger of injury! Keep the cover (1) open after coo- king for as long as the burners are still giving off heat. Do not store easily inflammable objects such as dish towels, napkins, etc., near the cooker.
  • Page 93: Oven

    Truma electric boiler Please follow the separate operating Boiler EL instructions provided by the manufac- turer. 230 V ~ 9.8 Oven Before initial operation, please note SMEV's operating instructions, which are located among the vehicle's do- cuments. Use only when the camper is on 230 V operation.
  • Page 94: Accessories

    HOBBY cannot accept liability for any damages caused by parts or changes that have not been approved by HOBBY. The following table includes a list of weights for accessories. If these parts are carried in or on the camper and are not included in the standard scope of delivery, they must be taken into consideration when determining the full load.
  • Page 95 10-2...
  • Page 96: Maintenance And Upkeep

    Rules for maintenance intervals • Have the first maintenance performed by a HOBBY dealer 12 months after the initial registration. • Havve all further maintenance performed once annually at a HOBBY dealer.
  • Page 97: Ventilation

    Rules for greasing and oiling: • Have the swinging lever bearings greased after every 2,000 to 3,000 kilometers driven. • Grease the bearing spaces on the casing of the overrunning system. • Oil movable parts such as bolts and joints. •...
  • Page 98 Rules for cleaning the exterior: • Rinse the vehicle with a light stream of water. • Wipe the vehicle down with a soft sponge and typical shampoo solution. Rinse the sponge often in the process. • Afterwards, rinse with a great deal of water. •...
  • Page 99 Rules for damage repair: • All damage should be repaired immediately to avoid further damage from corrosion. Con sult your HOBBY dealer. Undercarriage The undercarriage of the camper has been specially coated. Any damage to the protective coating should be repaired immediately.
  • Page 100: Upkeep

    Windows and doors Rules for upkeep: • Rub the insulation of doors and windows lightly with talcum. • Only clean acrylic glass window panes with a clean, moist sponge and a soft towel. Dry cleaning can scratch the panes. Do not use strong and aggressive cleaners which contain softeners or solvents! Talcum is available in auto specialty...
  • Page 101 Rules for cleaning the toilet area: • Clean with neutral liquid soap and a non- scouring cloth. • Do not use a vinegar concentrate to clean the toilet and the water system or to decalcify the water system. Vinegar concentrate can dam- age gaskets or parts of the system.
  • Page 102: Winter Operation

    11.4 Winter operation Preparation Due to the overall vehicle conception, (aluminium sandwich construction with insulated windows) your camper is suitable for winter operation. WARNING: We recommend that you optimise your camper in accordance with your personal tastes for winter camping. Your dealer will gladly advise you in these mat- ters.
  • Page 103 Winter operation In the course of winter operation, condensati- on forms at low temperatures when the vehicle is occupied. Sufficient ventilation plays a very significant role in ensuring a suitable air quality within the vehicle and preventing damage by condensation. Rules for ventilation: •...
  • Page 104 After the end of the winter season Rules for upkeep: • Wash the underside of the camper thoroughly. This removes thawing agents (salts, lye residue). • Clean the exterior of the camper and use com- mercially available car wax to preserve steel parts.
  • Page 105 11-10...
  • Page 106: Wste Disposal And Environmental Protection

    12. Waste disposal and environmental protection 12.1 The environment and mobile travel Environmentally sound use By nature of their activities, camper users bear a considerable responsibility towards the environ- ment. Therefore, you should always use your camper in an environmentally sound manner. Rules for environmentally sound use: •...
  • Page 107 Rules for the disposal of faeces: • Only add approved cleaners to the faeces tank. The use of other cleaners can be avoided by the installation of an active charcoal filter system. Apply cleaning fluid very sparing- ly. Excessive application does not guarantee the prevention of odour build-up! Disposal: •...
  • Page 108: Technical Data

    [kg] [kg] Zustand [kg] [kg] [kg] 400 SB De Luxe Easy 1100 400 SF De Luxe Easy 1100 400 KB De Luxe Easy 1100 400 SB Excellent Easy 1100 400 SF Excellent Easy 1100 410 SFe Excellent Easy...
  • Page 109 450 UF Excellent Easy 1047 1200 460 UFe De Luxe Easy 1066 1125 1300 460 UFe Excellent Easy 1077 1136 1300 495 UL De Luxe Easy 1107 1166 1400 495 UK De Luxe Easy 1118 1177 1400 495 UL Excellent Easy 1116 1175 1400...
  • Page 110: Basic Equipment

    610 UL Prestige 1413 1500 1800 610 UF Prestige 1419 1506 1800 610 UL Excelsior 1486 1573 1900 610 UF Excelsior 1491 1578 1900 650 KFU Prestige 1527 1614 1900 650 WFU Prestige 1493 1580 1900 650 UMFe Prestige 1477 1564 1900 650 KMFe Prestige...
  • Page 111: Lighting

    13.4 Lighting 12 V Vehicle lighting Position Description Voltage Voltage exterior left blinker exterior right blinker exterior stationary light exterior brake light exterior license plate exterior silhouette lamp exterior side marker lamp exterior side marker exterior 3rd brake light 12 V Interior lighting Lamp Lighting Ceiling lamp, round, grey...
  • Page 112: Index

    Index Accessories 0- Fighting a fire 02-10 Additional equipment 02-4 Fire extinguisher 02-9 Additional loads 03-8 First aid kit 02-9 Additional mirrors 05-5 Fixed tank 08-3 Automatic ignitor 09-6 Flaps opening and closing 05-3 changing the battery 09-6 Forced ventilation 05- Fresh water tank 08-2 Base vehicle 02-3 Function...
  • Page 113 Noises 03-6 Taillight bulbs 06-8 Technical data weights 3- Oiling 03-, - tire pressure 3- Oval media storage cupboard 07-2 Technically permissible total weight 03-8 Oven 09-0 Thermal skylight 06-8 Overrunning brake facilities 03- Tires 04- age 04-2 pressure 04- Parking space repair kit 04-6 selecting 02-5...
  • Page 114 Weltweit Nummer 1 Hobby-Wohnwagenwerk • Ing. Harald Striewski GmbH • Harald-Striewski-Straße 15 • 24787 Fockbek • Tel.: 0 18 05/33 99 09 (0,12 /Min.) • www.hobby-caravan.de...

Table of Contents