Hobby ONTOUR 2018 Operating Manual page 129

125
Setting the hot water temperature (for Combi heating
• Use the control knob / pushbutton to select the required hot
water temperature.
• Press the control knob / pushbutton to confirm the temperature.
Selecting the type of energy
• Use the control knob / pushbutton to select the desired type of
energy.
• Press the control knob / pushbutton to confirm the temperature.
The menu item "Select type of energy" will be depicted
when a heating system that uses electric heating ele-
ments has been connected (optional extra).
Selecting the fan speed
• Use the control knob / pushbutton to select the desired fan
speed.
• Press the control knob / pushbutton to confirm the temperature.
The menu item "Select fan speed" will be depicted
when the heating / hot water temperature (for Combi
heating system only) has been set.
Activating the timer (ON)
• Use the control knob / pushbutton to activate the timer (ON).
• Press the control knob / pushbutton to confirm the time
entered.
The timer will continue to remain active, even for several
days, until it has been deactivated (OFF).
The icon for the timer will flash when the timer has been
programmed and is active.
Deactivating the timer (OFF)
• Press to switch to the setting mode.
• Use the control knob / pushbutton to deactivate the timer
(OFF).
• Press the control knob / pushbutton to confirm the time
entered.
10. Built-in devices
*
only)