Hobby ONTOUR 2018 Operating Manual page 123

1
6
7
8
9
Truma control panel "CP plus"
119
If the system's power supply is interrupted, the time
must be reset.
Use the panel by the entrance to operate the basic
functions of the Combi heating system (see Chapter 7).
Combi heating system only: The change to the iNet-
ready version was carried out during the current season.
Depending on when the caravan was manufactured,
iNet-ready functions are available, whereby the Truma CP
plus control panel functions as an interface for operating
connected devices via the Truma App and iNet Box.
Operating and display controls
j Display
Status line
k
l Menu line (top)
2
m Menu line (bottom)
3
Display: 230V mains voltage (hook up power)
n
Display: timer
o
5
p Settings / values
4
Control knob / pushbutton
q
r Reset button
The control knob / pushbutton
in lines and
l
on the display
button to return to the previous menu.
r
Adjusting knob / pushbutton
The control knob / pushbutton
specified values and parameters. The changes are saved by briefly
pressing the button. Selected menu items flash.
Turn to the right (+)
- Goes through the menu list from left to right.
- Increases the values.
Turn to the left (-)
- Goes through the menu list from right to left.
- Decreases the values.
Press the button briefly
- Saves a selected value.
- Selects a menu item; changes to the setting mode.
10. Built-in devices
is used to select the menus
q
and change the settings. The data is shown
m
; the background is illuminated. Use the reset
j
is used to select and change
q