Hobby ONTOUR 2018 Operating Manual page 128

10. Built-in devices
Setting the timer
The timer can only be selected if the clock on the control
panel has been set.
If the timer has been activated (ON), the menu item
Activate timer (OFF) is first displayed.
Use the control knob / pushbutton to select the icon in the
menu line .
m
• Press to switch to the setting mode.
Entering the start time
• Use the control knob / pushbutton to set the hours and then the
minutes.
Entering the end time
• Use the control knob / pushbutton to set the hours and then the
minutes.
Danger of poisoning from exhaust fumes.
The activated preselection timer switches the heating
on even if the caravan has been parked. In enclosed
spaces (such as garages, workshops) the exhaust
fumes from the heating can lead to poisoning. If the
recreational vehicle is parked in an enclosed space:
• close the fuel supply (gas) to the heating system;
• deactivate the preselection timer on the Truma CP
plus control panel (OFF);
• switch the heating off on the Truma CP plus control
panel.
If the start/end time was exceeded during entry, the
operating parameters will only be taken into account
after the next start/end time has been reached. Until
then, the operating parameters set outside the timer
will remain valid.
Setting the room temperature
• Use the control knob / pushbutton to select the desired room
temperature.
• Press the control knob / pushbutton to confirm the temperature.
124