Ni Usb Type-C Adapters For Crio-904X; Ni Usb Type-C Cables For Crio-904X; Signal Descriptions; Power Connector - National Instruments cRIO-904 Series User Manual

implementing a type-A male connector. Use a USB Type-C multiport adapter to
simultaneously use this port as a display output and a USB host port.
The following NI USB Type-C adapters are available for the cRIO-904x.
USB to DVI Adapter with Retention, USB Type-C Male to DVI-D
Female
USB to VGA Adapter with Retention, USB Type-C Male to VGA
Female
USB Cable with Retention, Type-C Male to Type-A Female, USB
3.1, 3A
The following NI USB Type-C cables with retention are available for the cRIO-904x.
USB Cable with Retention, Type-C Male to Type-C Male, USB 3.1,
3A
PFI 0
The Programmable Function Interface (PFI) terminal is a SMB connector.
Signal Reference
PFI 0 —
Note The PFI 0 terminal can only be programmed with NI-DAQmx.

Power Connector

The cRIO-904x has a power connector to which you can connect a primary and secondary
power supply. The following table shows the pinout for the power connector.
8 | ni.com | cRIO-904x User Manual
Table 2. NI USB Type-C Adapters for cRIO-904x
Adapter
Table 3. NI USB Type-C Cables for cRIO-904x
Cable
Table 4. Signal Descriptions
Programmable Function Interface—You can configure the PFI terminal
as a timing input or timing output signal for AI, AO, DI, DO, or
counter/timer functions.
Description
Length Part Number
0.5 m 143558-0R5
0.5 m 143557-0R5
0.5 m 143555-0R5
Length Part Number
0.3 m 143556-0R3
1 m 143556-01
1 m 143556-02