Table of Contents
Advertisement
•
CPU Configuration Submenu
•
USB Configuration Submenu
Power/Wake Configuration Submenu
The Power/Wake configuration submenu contains the power and wake settings for the chipset
and cRIO-904x. The factory default settings provide the most compatible and optimal
configuration.
•
Ring Indicator Wake—This setting enables or disables the ability to wake a powered-off
system using the Ring Indicator pin of the RS-232 serial port. The default value is
Disabled.
•
Wake on Trigger— This setting enables or disables the ability to wake a powered-off
system using a trigger programmed in software. The default value is Disabled.
SATA Drives Submenu
The SATA drives submenu contains the hard disk drive (HDD) interfaces settings. The factory
default settings provide the most compatible and optimal configuration.
•
Chipset SATA—This setting enables or disables the Chipset SATA controller. The default
value is Enabled.
•
Onboard Storage—This item displays the onboard drive detected in the system.
CPU Configuration Submenu
The CPU configuration submenu contains the CPU settings for the cRIO-904x. The factory
default settings provide the most compatible and optimal configuration.
CPU Power Management
The CPU Power Management submenu contains CPU power management configuration
options. The factory default settings provide the most compatible and optimal configuration.
•
Burst Mode—This setting allows the processor to operate at frequencies higher than the
base processor frequency. Valid options are Enabled and Disabled. The default value is
Disabled. If enabled, the processor will run at the burst frequency if the maximum power
and temperature specifications of the processor are not exceeded. If disabled, the
processor with run at the base operating frequency. Enabling burst may increase
application jitter. As a result, NI recommends disabling burst for real time applications.
USB Configuration Submenu
The USB configuration submenu contains the USB host ports settings. The factory default
settings provide the most compatible and optimal configuration.
•
Dual Role Type-C Port FW Ver— This item shows the firmware version for the dual role
USB type-C port.
•
Display Port Type-C FW Ver— This items shows the firmware version for the
DisplayPort USB type-C port.
•
USB Devices—This item lists the total number of devices detected in the system,
categorized by device type.
cRIO-904x User Manual | © National Instruments | 43
Hide quick links:
Advertisement
Table of Contents
