Table of Contents
Advertisement
BIOS Setup Utility
Use the BIOS setup utility to change configuration settings and to enable special functions.
The cRIO-904x ships with configuration settings that work for most applications, but you can
use the BIOS setup utility to change configuration settings to meet the needs of your
application.
Changing BIOS settings can cause incorrect behavior, including failure to boot. In general, do
not change a setting unless you are sure what the setting does. Reset the BIOS settings to
restoring the default configuration settings.
Launching the BIOS Setup Utility
Complete the following steps to launch the BIOS setup utility.
1.
Connect a video monitor to the USB 3.1 Type-C DisplayPort connector on the
cRIO-904x.
Note
connector, you may need to use a VGA-to-Type-C or DVI-to-Type-C adapter.
2.
Connect a USB keyboard to the USB 2.0 host port on the cRIO-904x.
3.
Power on or reboot the cRIO-904x.
4.
Hold down either the <F10> key or the <Del> key until
appears onscreen.
device:
5.
Use the Down Arrow key to select Enter Setup and press <Enter>. The setup utility
loads after a short delay.
The Main setup menu is displayed when you first enter the BIOS setup utility.
BIOS Setup Utility Keyboard Navigation
Use the following keys to navigate through the BIOS setup utility:
Key(s)
Left Arrow, Right
Arrow
Up Arrow, Down
Arrow
<Enter>
<Esc>
In order to connect the monitor to the USB 3.1 Type-C DisplayPort
Table 17. Navigation Keys
Move between the different setup menus. If you are in a submenu,
these keys have no effect, and you must press <Esc> to leave the
submenu first.
Move between the options within a setup menu.
Enter a submenu or display all available settings for a highlighted
configuration option.
Return to the parent menu of a submenu. At the top-level menus, this
key serves as a shortcut to the Exit menu.
Please select boot
Function(s)
cRIO-904x User Manual | © National Instruments | 41
Hide quick links:
Advertisement
Table of Contents
