Operating The Answering System - Sharp UX-A1000 Operation Manual

Operating the Answering System

START/
4
MEMORY
Press
•
The outgoing message can be up to 60 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Operating the Answering System
Activating the answering system
To turn on the answering system so that callers can leave messages, press
RESOLUTION/
RECEPTION MODE
"Telephone Answering Device".)
♦
It will not be possible to set the reception mode to TAD if an outgoing
message has not been recorded.
Note: In TAD mode, the machine will automatically switch to fax reception if it
detects six seconds of silence after answering a call. For this reason, if a
caller pauses for this length of time while leaving a message, they will be cut
off.
34
and speak into the handset to record a message.
PLAY
until the arrow in the display points to TAD. (TAD stands for
RESOLUTION/
RECEPTION MODE
STOP
. Note that the general outgoing message
TEL
.
FAX
TAD