Table of Contents
Advertisement
3
If the fax doesn't respond, or if the other party first talks to you and then
wants to send a fax, press
phone (only on a tone dial phone). This signals the fax to begin
reception. Hang up.
•
The above step is necessary if you have set the Fax Signal Receive setting
to NO.
•
Your fax will not accept the signal to begin reception (
document is loaded in its feeder.
Putting a call on hold
To put the other party on hold during a phone conversation, press
When this is done, they cannot hear you. You can put the handset back in the
cradle without breaking the connection. When you are ready to speak with the
other party again, pick up the handset. If you did not put the handset back in
the cradle, press
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
from the computer fax modem. Follow the steps below to change the setting.
1
Press
FUNCTION
2
Press
once and
once and
5
again to resume conversation.
HOLD
once and
3 times.
6 times.
Optional Reception Settings
twice on the extension
5
OPTION SETTING
Display:
FAX SIGNAL RX
) if a
.
HOLD
81
Hide quick links:
Advertisement
Table of Contents
