Loading Printing Paper - Sharp UX-A1000 Operation Manual

Loading Printing Paper

Loading Printing Paper
You can load letter or legal size paper in the paper tray. Recommended paper
weight is 20-lb. Copy Bond. The maximum number of sheets is as follows:
Letter size:
Legal size:
1
Pull the paper plate toward you, and
remove the paper tray cover from the
paper tray.
2
If you are going to load legal paper, flip
up the paper tray extension.
3
Pull the paper plate toward you and insert the stack of paper into the
tray, PRINT SIDE UP .
•
If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
Be sure to load the paper so that
printing takes place on the print side
of the paper. Printing on the reverse
side may result in poor print quality.
14
Approx.
200 sheets (20-Ib. copier paper at room temperature;
maximum stack height should not exceed line on tray)
Approx. 100 sheets (20-Ib. copier paper at room temperature)
The stack
should not
be higher
than this line